Professional HVAC design for new builds.
HVAC design and installation for new construction across Southwest Florida — high-efficiency systems built for long-term comfort, durability, and energy savings.
Built right,from day one.
Building a new home or commercial property in Southwest Florida? Iceberg Aire partners with builders, contractors, and owners to design HVAC systems aligned with your structure's layout, square footage, airflow requirements, and energy goals. From concept to custom ductwork, our focus is a seamless install of premium equipment that performs from day one.
Our veteran-owned crew is committed to doing it right the first time — on schedule and within budget. Call us to discuss your new construction HVAC project anywhere in Southwest Florida.
How do you handle HVACon a new construction build?
Pre-construction. We review plans, run a Manual J load calculation, and lay out supply and return ductwork. We flag conflicts with framing, electrical, and plumbing before the slab gets poured. Equipment is specified — make, model, SEER2 — and submitted for permit.
Rough-in. Ducts, line sets, drain lines, and thermostat wiring are run before drywall closes the walls. Inspections coordinated with your GC and the local building department.
Trim-out and startup. Indoor and outdoor units set, registers and grilles installed, system charged, started, and tested. We hand you a clean punch list and a homeowner walkthrough — not a stack of stickers and a phone number.
What do you deliver for new construction HVAC projects?
Custom HVAC system design
Engineered to your blueprint and Manual J load calculations.
Ductwork design & fabrication
Properly sized runs, returns, and supplies.
Full system installation
Homes and commercial buildings, turnkey.
Energy-efficient equipment options
Long-term savings built into the spec.
Code-compliant installations
Backed by expert craftsmanship at every step.
On-schedule, on-budget
Coordinated with your trades and your timeline.
More forthis project.
Owners moving in soon? Send them to our care plan so the new system gets the maintenance it deserves. Need a replacement on an existing property instead of a ground-up build? See installation & replacement. Commercial project? Commercial HVAC.
New construction HVACin Cape Coral.
New builds in Cape Coral come with a specific list of HVAC demands that don't show up the same way inland. Salt-laden air off the Caloosahatchee and the gulf accelerates coil and cabinet corrosion, so equipment selection and outdoor-unit placement matter from day one. Summer humidity routinely runs above 70%, which means the system has to be sized and staged to dehumidify — not just cool — or the finished home will feel clammy even at 74°F. Most Cape Coral homes are also block-and-slab construction with limited attic space, and that constrains where ductwork, air handlers, and returns can physically live.
Seasonal ownership adds another layer. A large share of Cape Coral homes sit vacant for months while the owner is up north, and the AC still has to hold humidity down or the drywall, cabinets, and hardwood will pay for it. We design new-construction systems with that reality in mind — right-sized equipment, communicating thermostats that can run a vacation-hold humidity setpoint, and drain-line safeguards that don't rely on someone being in the house to catch a float switch.
Iceberg Aire works with Cape Coral builders on design-through-startup: load calculations against the actual plan set, ductwork layout coordinated with truss and electrical, zoning where the floor plan calls for it, and controls the homeowner can actually operate. We're licensed in Florida under CAC#1819065 and pull permits in the City of Cape Coral and unincorporated Lee County. For the retrofit side — homeowners who move into an older Cape Coral home and inherit a tired system — see our Cape Coral AC repair page.
What builders search for: design, ductwork, zoning, controls.
These are the four line items that separate a comfortable Southwest Florida new build from a callback list. Iceberg Aire handles all four in-house, coordinated with your trades and your inspection schedule.
HVAC design (Manual J / Manual D)
Every new build starts with a proper ACCA Manual J load calculation against the actual plan set — insulation values, window packages, orientation, infiltration, and Southwest Florida design conditions — followed by Manual D duct design to size supplies, returns, and trunk lines to the load. Rules of thumb by square footage undersize the dehumidification side and oversize the sensible side; we don't work that way.
Ductwork installation
Ductwork is fabricated and installed to the design, not to whatever's easiest to route around the trusses. Trunks and branches are sized for balanced airflow, joints are sealed, boots are supported, and returns are placed where they'll actually pull air — not stuck in a hallway soffit because there was room. Clean rough-in makes trim-out and startup uneventful.
Zoning systems
Multi-story homes, split floor plans, and Cape Coral pool-house additions almost always benefit from zoning. We install two- and three-zone systems with motorized dampers and zone controls that let the primary bedroom, main living, and guest wings hold their own setpoints without over-cooling the rest of the house. Zoning done right lowers runtime and evens out comfort; done wrong it whistles and short-cycles — we plan the duct static and bypass strategy before the first damper goes in.
Controls and smart thermostats
Communicating Ruud and Bryant systems, ecobee and Honeywell smart thermostats, humidity control, remote access for seasonal owners, and integration with the homeowner's smart-home platform when that's part of the spec. We set the schedules, humidity targets, and fan strategies at startup and walk the homeowner through them — not just leave a stack of manuals on the counter.
Where we buildnew construction HVAC.
Iceberg Aire is licensed statewide (Florida CAC#1819065) and focused on Southwest Florida. We install new construction HVAC in Cape Coral, Fort Myers, North Fort Myers, Naples, Bonita Springs, Estero, Lehigh Acres, Port Charlotte, and the rest of Lee, Collier, and Charlotte counties. See the full Southwest Florida service area for the complete list, or contact us to walk through your project — plan review, ductwork strategy, and equipment options in one call.
New construction questions.
Same-day. Done right. Call your neighbor.
Our dispatch is open 7 days. We answer in three rings or less.